Note: (batteries NOT included)
The battery voltage instructions:
The lights which on the front of panel used in warning leakage and battery voltage instructions.
Green – battery voltage normal, suitable for work;Orange – battery voltage close to the limit,
need to work as soon as possible replacement Boot reset/automatic follow circuit:
Boot reset: this instrument after startup, can automatically adjust to within 6S ignore probe
existing circuit, enter detection concentration level the refrigerant state, if users in leakage source
can be conveniently near boot, looking for higher levels of the leakage source. The device also
moved to clean the air can be powered by adjustment to maximum sensitivity, than zero concentration
level, right now the leakage can be detected. automatic follow circuit: in this instrument in detection
condition, automatic circuit will follow the environment changes, the gas concentrations of halogen to
prevent false-negatives. Leakage warning:When the gas leakage are discovered, “di di” sound will
become more hurried, leakage, “di di” sound more rapid. Meanwhile lights flash.
Working temperature: 0 °C ~ 52 °C.
Maximum sensitivity: 6gr/yr(halogen refrigerants).
Battery life: about 50 hours under normal use.
response time: instantaneous
Square type: unlimited
TanGan length: 20cm (7.87 inches)
Feet inch: 22.9 cm x 6.5 cm x 6.5 cm (9.01 x 2.56 x 2.56 inches).
Preheating time: about 6 seconds.
Reset the time: 2-10 seconds.
Electricity source: 6v DC, 4 x AAA batteries.
1 x Instruction manual
1 x Carrying pouch
1 x Halogen leak detector with probe